Kitchen & appliances ENHET kitchen | ENHET Corner kitchen, white/white frame - RJ27691

Life in the kitchen is more fun when there is room for more than one – and easier too with convenient wall storage that does not compromise on workspace as well as room for the cooking functions you need.

Cabinet code ENHET K406

A white surface with a wide frame is like an empty canvas where your choice of accessories and accent colors sets the style. Modern or classic - you decide.

An L-shaped kitchen with a mix of open and closed storage for displaying or hiding things and ample counterspace that allows more than one to comfortably work in the kitchen at the same time.

By combining wall cabinets and shallow wall frames you make good use of the walls without steeling too much of the workspace.

You can easily add more ENHET accessories to extend the use of your storage combination. And best of all – you don’t have to drill. Sold separately.

The unique wedge dowels make assembly easy and the fittings are nearly invisible.

Fiberboard, Plastic foil

Main parts:

Particleboard

Front side/ Back side:

Plastic foil

Edge:

Plastic edging

Side panel:

Particle- and fiberboard with honeycomb paper filling (100% recycled paper), Plastic foil, Plastic edging

Bottom panel/ Back rail/ Filling:

Particleboard, Plastic foil, Plastic edging

Side panel:

Particle- and fiberboard with honeycomb paper filling (100% recycled paper), Plastic foil, Plastic edging

Bottom panel/ Back rail:

Particleboard, Plastic foil, Plastic edging

Drawer:

Steel, Epoxy/polyester powder coating

Drawer bottom:

Fiberboard, Plastic foil

Side panel/ Bottom panel:

Particle- and fiberboard with honeycomb paper filling (100% recycled paper), Plastic foil, Plastic edging

Back rail/ Top rail:

Particleboard, Plastic foil, Plastic edging

Tubes/ Rail:

Steel, Powder coating

Shelf:

Galvanized steel, Powder coating

Wedge:

Steel, Epoxy/Acrylic coating

Side panel/ Bottom panel/ Top panel/ Back rail/ Shelf:

Particleboard, Plastic foil, Plastic edging

Back panel:

Fiberboard, Plastic foil

Particleboard, Plastic foil, Plastic edging

Stainless steel, Powder coating

Tube:

Steel, Powder coating

Foot:

Polypropylene plastic (min. 20% recycled)

Plate:

Steel, Powder coating, Galvanized steel

Rivet:

Steel, Epoxy/Acrylic coating

Plinth:

Particleboard, Plastic foil

Roll edge:

Laminate

Particleboard, Laminate, Plastic edging, Unbleached paper

Ceramic, Colored glaze

Main parts:

Polypropylene

Strainer/ Strainer basket:

Stainless steel

Seals:

Synthetic rubber

Body:

Brass, Metallized

Spout:

Brass, Brass, Metallized

Main parts:

Feldspar porcelain

Metal parts:

Aluminum, Acrylic coating

Bamboo, Clear acrylic lacquer

Wipe dry with a clean cloth.

Wipe clean with a water dampened soft cloth and a mild non-abrasive dish detergent or soap, if necessary.

Wipe dry with a clean cloth.

To prevent permanent stains on the countertop, wipe clean spills or messes immediately with a soft cloth dampened in water and a mild washing-up detergent or soap.

Wipe dry with a clean cloth.

Do not use scouring-powder, steel wool, hard or sharp tools which can scratch the surface of the sink.